Using Vetric Aspire 9.5,
All I am Trying to cut is a State of Alabama Profile.
Set it up to .750 Thickness, and to cut 6 passes at .125 per pass, with .250 Flat End mill.
Then Error message says Warning You will cut through material, To a depth of .880 inches
Run the file in Simulator and instead of making cuts of .125 it makes deeper cuts that after the 6 passes it comes out to .880.
I Tried editing the passes to 5 passes, It then just makes 5 deeper cuts to add up to .880,, No matter how you set it, It wants to cut to .880
Can someone tell me what I am Doing wrong here,, ?
I'm Lost as a ball in High Weeds now!! Geeezzeee!!
Cubs :-)