584,830 active members*
5,557 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2015
    Posts
    10

    Exclamation Uneven engraving on ABS material

    Hi,

    I have a Chinese laser co2 60w machine. Lihuiyu controller with CorelLaser
    Everything was fine for a small period of time, and now I have a problem.

    The engraving is uneven (you can best see it on white material) There are places where it burns more material and places where less material is burned. (engraved deeper)
    I mainly engrave ABS dual layer material.
    I did some research and my guess the laser tube or power supply for the laser tube or the material
    I also checked so that the lens is not loose or moving inside the laser head.

    I attached a picture.

    Can someone tell me what is the problem. What should I replace?

    Thank you!

  2. #2
    Join Date
    Dec 2019
    Posts
    26

    Re: Uneven engraving on ABS material

    unstable level of power from laser source way above 5.00% with the combination of low resolution optics/lenses 100um and above installed in the machine. Kind Regards.

  3. #3
    Join Date
    Apr 2015
    Posts
    10

    Re: Uneven engraving on ABS material

    Thank you for your message. Should I try and change the laser power source?

Similar Threads

  1. Uneven engraving mystery...
    By syo in forum Laser Engraving / Cutting Machine General Topics
    Replies: 2
    Last Post: 11-21-2020, 05:05 PM
  2. PROBLEM - Uneven engraving from left to right
    By Lunder in forum Laser Engraving / Cutting Machine General Topics
    Replies: 3
    Last Post: 12-13-2015, 11:33 PM
  3. GADJ - Tool for Engraving Uneven Surfaces
    By jblakey in forum G-Code Programing
    Replies: 1
    Last Post: 04-24-2014, 01:04 AM
  4. Engraving and uneven surfaces
    By phatjap in forum DIY CNC Router Table Machines
    Replies: 8
    Last Post: 04-21-2010, 01:11 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •