Hello. I have a design drawn and could use some feedback please. What motors should I pair with it? I currently have it drawn with a NEMA 34 motor mount from Automation4less. Anyone have any luck with their mounts/supports? Also looking at either going the Avid electronics/Mach4 route or going from scratch with Acorn with the best bang for the buck motors I can find.
I'll be machining primarily hardwoods and plywood.
5x5 XY 7.625" Z work area
3/4" tool plate and Misumi 9090, 45180, 80160 Rigid extrusion
Hiwin HG25 rails and medium preload blocks
RM2010 Ballscrews
Avid Pro 8" Z
Attachment 446830Attachment 446832Attachment 446834