Hello everyone,
I have a Tsugami BW 12. When trying to run live tool spindle with M23 code It shows servo alarm 413 LSI over. When we run this axis as linear axis the motor run and works properly with G0 code.
But when we try use this as spindle and try to run with M code It shows alarm no 413. Machine position & servo error show its position in Diagnose screen and give this alarm after reached at some position of servo error.
I have updated default parameters for the motor.

Motor installed with live tool = Fanuc Beta iS 2/4000 Spec = A06B-0061-B003#0100 0.50 KW
Anyone has solution for it??

Thanks in advance...