Hey Guys;
I just listed on ebay a new control system designed around DMM Tech Servos and Dyn2 Drives. They are 750 watt and have been bench tested. After the hard wired bench test, I moved the control system to a control panel and added all connectors. Unfortunately, I have since retired and ran out of steam. The system is at least 80% finished using linuxcnc with the included computer. I just don't want to build the mounts and redesign my old system for the new motors. Heck, I hardly use it anyway.

Included are the servos, drives, control cards (including the DMM BOB) and a inexpensive pendant that has been wired but not tested. See the add for other details or send me a PM on specifics. It will be a heck of a deal for the right application at a fraction of the new cost.

Bill



DMM TECH Control System with 750W Servos 80% | eBay