[triumph406]

A friend of mine is selling a Milltronics Partner IVe CNC knee mill. he's asking $5k obo.

It's located in Riverside Co So Cal

PM me for a phone number if interested

Perfect setup for DIY/Garage environment. This is a whole package that includes ABSOLUTELY everything you need to make parts right away. It consists of:
Excellent condition Milltronics Partner IVe CNC. Knee mill type. This machine has been running with a precision close to +-0.001 for years.
Extended Y and Z axis.

Setup for both mist and FLOOD cooling/lube with Custom coolant enclosure.

Power Z axis.

Pneumatic tool holder (2 second tool changes)
More than 20 CAT40 Tool holders included (over 30 ER16 collets)

Edge finder and a large assortment of both roughing end finishing endmills of most common sizes (no chinese cheap endmills).

Professional 6" Vise included

Rotary Phase Converter included to convert regular 220v single phase line into 220v 3Phase needed to run this machine. 5HP Spindle Motor equipped with VFD for accurate 1-5000RPM control.

Includes a Registered copy of Bobcad V27 3 Axis PRO Cad/Cam software (current version is $4095).

Machine can be demo'd on site before purchase. It will include a training session as well as demo of this machine working for serious buyers.

Moving this machine is the responsibility and expense of buyer, I can possibly recommend an inexpensive mover that can handle this job.

Please feel free to contact me for further info. If the ad is up the machine is still for sale (unless someone JUST beat you to it...)

Attachment 446192Attachment 446194Attachment 446196Attachment 446198Attachment 446200

[ChadSavage]

Did the VFD come on the machine or is it after market?

[sportybob]

Hi Triumph, a couple things on your description, 2 second tool changes. this has a manual tool change ( no tool changer) so doing a 2 second tool change is not likely.. The machine can be run on single phase. although the horse power will be lower.
Nice job on the able enclosure

Sportybob