584,860 active members*
5,252 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Okuma > Okuma OSP U100m DNC Parameter
Results 1 to 2 of 2

Threaded View

  1. #1

    Post Okuma OSP U100m DNC Parameter

    Where I work we have an Okuma MCR-BII double column machine with U100M control. I am looking for some way to know if I can activate the DNC, because the machine does not have the option in the button that the manual mentions.

    I have read that the DNC is optional in this type of machine, so I really don't know if it has it, previously this machine was in the Japanese language, and the software was changed to the English language.

    I thought that probably the machine has disabled the DNC function with some parameter.

    I have some manuals downloaded from the internet, but they are not entirely clear to answer my question.

    I attach two images where you can see the difference between what the manual has and what our machine has.

    If anyone can help me I would really appreciate it.
    Attached Thumbnails Attached Thumbnails bokuma1.jpg   bokuma2.jpg  

Similar Threads

  1. OKUMA MX55VB , OSP-U100M , DNC-DT
    By savasfazer in forum Okuma
    Replies: 0
    Last Post: 06-25-2020, 08:17 PM
  2. OKUMA OSP U100M 1313 ALARM A EROR
    By Samed42 in forum Okuma
    Replies: 2
    Last Post: 05-07-2020, 08:20 AM
  3. Okuma OSP-U100M Programming manual
    By mrzwing in forum Okuma
    Replies: 7
    Last Post: 03-30-2020, 01:56 PM
  4. OKUMA OSP U100M HELP FOR SMALL MEMORY
    By bigodinos in forum Okuma
    Replies: 33
    Last Post: 10-07-2016, 03:59 PM
  5. Okuma OSP U100M / U10M
    By bajivan in forum Okuma
    Replies: 1
    Last Post: 11-07-2014, 02:20 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •