Hi all,

I recently bought a cnc2all control box ( https://web.archive.org/web/20190130...m/cabinet.html ) for a pretty good price on eBay.

Having looked online for the website, I see that cnc2all must have closed down at some point over the past year or two, however there are a few archives of the site on the way back machine.

It looks like this cabinet has everything I need apart from built in spindle control. Cnc2all did a separate 0-10v spindle control board ( https://web.archive.org/web/20190130...-kontroll.html ) which integrates with the main board, looks like this is what I need!

Its probably a long shot, but if anyone has any information regarding cnc2all or contact details for the people who used to run it that would be great!

cheers