584,830 active members*
6,038 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Okuma > How to add spring passes using G71 threading cycle
Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2018
    Posts
    4

    How to add spring passes using G71 threading cycle

    I'm new to the Okuma control (OSP-P300L-R Control). The machine is a Genos L250E. I am using a G71 to cut an internal thread:

    G71 X.750 Z-1.39 H.05 D.008 U.002 B60 F1. J20 M73 M33 A0

    The tool makes only one pass at the final diameter. How do I add spring (zero) passes?

    Thanks!

  2. #2
    Join Date
    Jun 2015
    Posts
    4131

    Re: How to add spring passes using G71 threading cycle

    Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •