538,273 active members*
3,198 visitors online*
Register for free
Results 1 to 2 of 2
  1. #1
    Join Date
    Aug 2020

    Y axis no movement

    I have not had any movement in my Y axis. After a diagnostic check I discovered that it is my driver. I took the driver apart but only noticed some dirt no fuse to be blown . Capacitors and everything looks good to the eye but there is not connection on my A- with solder like the others are connected. Could this possibly be my problem or are they not supposed to be connected? I am pretty new to this so there's no stupid questions right.

  2. #2

    Join Date
    Aug 2020

    Re: Y axis no movement

    Are you saying there is no solder at all on the A- pin? If so, that sounds like an issue. Can you post a picture maybe?

Similar Threads

  1. 3 Axis CNC Mill Software for PC - Checking Axis Movement
    By rickwoz in forum General CNC (Mill / Lathe) Control Software (NC)
    Replies: 2
    Last Post: 05-05-2015, 04:06 AM
  2. uncommanded A axis movement when doing 4 axis work.
    By Tristar500 in forum Mach Mill
    Replies: 5
    Last Post: 09-12-2014, 02:47 AM
  3. X axis differential to create Y axis movement.
    By mpatterson557 in forum Uncategorised CAM Discussion
    Replies: 0
    Last Post: 03-10-2014, 12:18 AM
  4. Grinding and unexpected axis movement if rapiding 2 axis
    By DarkSabre in forum Taig Mills / Lathes
    Replies: 4
    Last Post: 03-26-2010, 05:37 AM
  5. Axis Movement
    By UKRobotics in forum Uncategorised MetalWorking Machines
    Replies: 2
    Last Post: 12-17-2004, 08:33 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts