584,798 active members*
4,320 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > After 2 month covid shutdown - 21T wont boot - 4 simultaneous screens of garbage
Results 1 to 8 of 8
  1. #1
    Join Date
    Dec 2018
    Posts
    25

    After 2 month covid shutdown - 21T wont boot - 4 simultaneous screens of garbage

    Hi

    machines were shutoff for a covid shutdown, for 2 mos, just tried booting up the 21T. Machine was happily shut down as normal, battery was in good shape (just replaced) prior to shutdown.

    After "on"... no pumps coming on, no servos coming on. Screen comes up with what looks like 4 "subcreens" (this is a monochrome monitor, so it def doesnt have the resoloution for 4 screens LoL), looks like top left is same as top right is same as bottom left is same as bottom right - but mirrored 4 times - cant make out the words - as if it was low res.

    Looked in the back there is no error just two red bars "- -" which I understand to mean "not ready"...

    anyone any ideas ?? in a bit of a jam...

    THanks

  2. #2
    Join Date
    Dec 2018
    Posts
    25

    Re: After proper shutdown - 21T wont boot - 4 simultaneous screens of garbage

    Here is a shot of the screen:

  3. #3
    Join Date
    Aug 2009
    Posts
    1566

    Re: After 2 month covid shutdown - 21T wont boot - 4 simultaneous screens of garbage

    ...the virus continues

    Try leaving it powered up for a while....reboot

  4. #4
    Join Date
    Dec 2018
    Posts
    25

    Re: After 2 month covid shutdown - 21T wont boot - 4 simultaneous screens of garbage

    u mean like leave the mains on.. like to warm it up ? then just hit off and then on again on the control ? this is scary was thinking powered up mught be frying ****.. or do u nean turn off mains to reboot.. has this been seen before ?? im stumped

  5. #5

    Re: After 2 month covid shutdown - 21T wont boot - 4 simultaneous screens of garbage

    Do you have a control backup? Do you know how to get to the BOOT screen?

  6. #6
    Join Date
    May 2016
    Posts
    526

    Re: After 2 month covid shutdown - 21T wont boot - 4 simultaneous screens of garbage

    check your 24v to the board

  7. #7
    Join Date
    Dec 2018
    Posts
    25

    Re: After 2 month covid shutdown - 21T wont boot - 4 simultaneous screens of garbage

    I dont think I have a control backup, I have the parameters, but no card. BOOT screen, no not sure. I will check the 24v..

  8. #8
    Join Date
    May 2016
    Posts
    526

    Re: After 2 month covid shutdown - 21T wont boot - 4 simultaneous screens of garbage

    Whereabouts are you as there maybe an engineer local to you on here

Similar Threads

  1. LB15 wont boot up need help
    By rotec in forum Okuma
    Replies: 18
    Last Post: 12-17-2012, 06:32 PM
  2. 2006 TM1 wont boot up.
    By sexton in forum Haas Mills
    Replies: 10
    Last Post: 07-01-2012, 01:59 PM
  3. Won't boot up, Garbage on the screen
    By ddgman2001 in forum Fadal
    Replies: 5
    Last Post: 05-12-2011, 11:20 PM
  4. 2001 VF1 Wont boot up!
    By CAN MACHINE in forum Haas Mills
    Replies: 8
    Last Post: 03-21-2011, 04:15 PM
  5. VF4 WONT BOOT
    By jimzin15754 in forum Haas Mills
    Replies: 3
    Last Post: 06-03-2008, 11:23 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •