584,833 active members*
5,525 visitors online*
Register for free
Login
Results 1 to 11 of 11
  1. #1
    Join Date
    Jul 2007
    Posts
    20

    Chineese laser troubles

    Hi All,
    I purchased an Omnisign plu pro 1000 laser back in January or this year and still can not get it to work. Is there any one out there that has an wiring digram for this machine so I can check to see where there might be power failure. Also does any one know the factory home site is not just a sale rep. Thanks for any help you can give me.
    Jim

  2. #2
    Join Date
    Oct 2006
    Posts
    45
    Hello Jim,
    Try www.reddotinternational.com They sell there machines so they should help you weather they do is another matter.

    Good luck

  3. #3
    Join Date
    Jul 2007
    Posts
    20
    Thank for the come back. That is who I bought this machine from. That is most of the problem.

  4. #4
    Join Date
    Dec 2006
    Posts
    15
    Does EVERYBODY here hide their e-mail address?

    How in the hell do you expect to get help?

    Cheers,

    George

  5. #5
    Join Date
    Jul 2007
    Posts
    41
    Quote Originally Posted by gmatov View Post
    Does EVERYBODY here hide their e-mail address?

    How in the hell do you expect to get help?

    Cheers,

    George
    ^_^, you'v got the point! A nice post!

  6. #6
    Join Date
    Sep 2006
    Posts
    1
    Jim have a look at the following thread http://www.cnczone.com/forums/showthread.php?t=30122. They have some contact details that may be of use to you. Unfortunately I have been stung badly by the people at Red Dot (aka ITConnections Australia on eBAY) also.

    Where are you from? You may be able to get some help out of the New South Wales Department of Fair Trading. Red Dot only seem to act when threats of involving Dept of Fair Trading are raised. We are starting action against these guys ourselves. Sorry I cannot help you any more than that but best of luck. For everyone else out there be carfeul when you deal with this company.

  7. #7
    Join Date
    Jul 2007
    Posts
    20
    I'am sorry I did not know my email was hidden. [email protected]

  8. #8
    what software does it use, and what it actualy does ord does not do,
    i might be able to help

    Edward
    [email protected]

  9. #9
    Join Date
    Jul 2007
    Posts
    20
    Hi Mexico Redsail,
    I had the motion card replaced from a company in China and now the laser head moves but the laser will not fire. It is getting 220 volts to the switch but the fans or the tubs will not work.
    Thanks Jim

  10. #10
    Join Date
    Jul 2007
    Posts
    20

    Omninsign laser

    “Any issue with my machine has been resolved by Reddotinterionial, and I am very pleased with the results.”

  11. #11
    Join Date
    Oct 2007
    Posts
    240
    Nearly two years later?!
    Hi-TecDesigns.com -- Automotive Lighting Systems

Similar Threads

  1. Chineese Laser Machines and Tubes
    By Laser Doctor in forum Laser Engraving / Cutting Machine General Topics
    Replies: 16
    Last Post: 09-14-2007, 09:11 PM
  2. air troubles
    By wadetool in forum Haas Mills
    Replies: 2
    Last Post: 02-19-2007, 10:30 PM
  3. fanuc 0m-B troubles
    By sammer003 in forum DNC Problems and Solutions
    Replies: 2
    Last Post: 01-25-2007, 12:32 PM
  4. DXF troubles
    By kung in forum G-Code Programing
    Replies: 2
    Last Post: 11-02-2005, 10:41 PM
  5. CAD Troubles
    By Blackhawk in forum Uncategorised CAM Discussion
    Replies: 27
    Last Post: 06-12-2005, 04:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •