Hello everyone. I've been wanting to hook up an old xbox360 controller to my CNC. I am aware that this is possible in mach3/4, but is it possible to use an xbox controller on another controller?
Results 1 to 2 of 2
-
08-19-2020, 02:24 PM #1
- Join Date
- Apr 2020
- Posts
- 7
Operating your CNC with an xbox360 controller?
-
08-19-2020, 02:30 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: Operating your CNC with an xbox360 controller?
UCCNC has an XBOX controller plugin.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
Has anybody used xbox360 controller as a pendant in UCCNC?
By curiosity22 in forum Australia, New Zealand Club HouseReplies: 4Last Post: 02-21-2020, 03:44 AM -
Mach3 not recognizing Xbox360 controller
By WWFisher in forum Mach Software (ArtSoft software)Replies: 0Last Post: 07-28-2019, 07:23 PM -
Xbox360 Controller Plugin Macros/Button Assignments
By Wolfspaw in forum Mach Wizards, Macros, & AddonsReplies: 0Last Post: 05-09-2014, 01:44 AM -
Syntec EZ4 controller operating manual in English
By kenkad in forum Chinese MachinesReplies: 1Last Post: 09-09-2013, 06:15 PM
Tags for this Thread
Posting Permissions
