I have a kia turn-15 with fanuc oi-t controller.
The machine was crashed yesterday and started with a z axis torque alarm. I got that freed but now have an al-60 index turret power off alarm.
The procedure im following was written down by my father and is not working.

1. change parameter 0011 to 00000001
2 turn off and on
3.set k5 bit to 1
4. push select, feed hold, and spindle stop.
5. turn turret by hand till arrows match up.
6. push call/bz off
7. set k5 bit to 0
8 push spindle stop, select, and feed hold
9. change para 0011 back to original
10. power off and on

this is not working and im not sure what to do right now