I have a Amada Pega 357 punch machine (Fanuc04 pc). I would like to connect the local PC network for (RS232-RJ45) Cable. I need your help.
I have a Amada Pega 357 punch machine (Fanuc04 pc). I would like to connect the local PC network for (RS232-RJ45) Cable. I need your help.
I used an RS232 to USB adapter connected to a laptop on my old Vipros 345 with the 04PC. Programs were transferred with DNC4U, which worked very well. Programs were stored in a network folder written to by our programming software.
Hi
Have you tried the COMMUNICATION SOFTWARE FOR FANUC CNC software?.
This is an excellent software that works with all FANUC CNC (old and new).
You can download from:
https://www.softpedia.com/get/System...or-FANUC.shtml
Regards
Try to use Amada transmission software peuwin. She can be well compatible with all Amada machine tools.
E-mail :[email protected]