Hi i have a Hitachi seiki VM40 with seikos control and a 6000rpm Mitsubishi spindle. Everything works perfectly but speed won't increase over 3000rpm. There is no alarm, no load on spindle and spindle runs smooth and true. Can any one help with advice please?
Results 1 to 2 of 2
-
08-29-2020, 09:46 PM #1
- Join Date
- Aug 2020
- Posts
- 2
HELP PLEASE spindle wont go over 3000rpm
-
08-29-2020, 09:55 PM #2
Member
- Join Date
- May 2016
- Posts
- 471
Re: HELP PLEASE spindle wont go over 3000rpm
Are you sure you're Spindle Override isn't somehow set at 50%. (Stripped knob? Broken wire?) When you put in something less the 3000, do you have any way to verify it's at the chosen speed? Maybe someone set a Max Spindle RPM parameter limiting it to 3000 because of issues at higher RPM's.
Just some ideas.
Reply With QuoteSimilar Threads
-
Hitachi seiki vm40 spindle wont go over 3000rpm
By Craig1971 in forum Hitachi SeikisReplies: 2Last Post: 09-15-2020, 11:41 PM -
Spindle 2.2kw water cooled spindle wont work on mach 3 I am new to this.
By estebanpagan in forum Phase ConvertersReplies: 2Last Post: 03-16-2017, 02:16 PM -
Hi torque / Low RPM (1000 - 3000rpm) spindle/router
By jalvim in forum Spindles / VFDReplies: 5Last Post: 10-13-2015, 10:33 PM -
Replacing our Fadal 2216's spindle. Spindle wont come out
By kryz in forum FadalReplies: 0Last Post: 02-04-2015, 06:39 PM
Tags for this Thread
Posting Permissions
