585,996 active members*
4,504 visitors online*
Register for free
Login
IndustryArena Forum > Laser Engraving and Cutting Machines > Laser Engraving / Cutting Machine General Topics > new 60w Chinese laser suddenly not having full Y axis movement

Thread: new 60w Chinese laser suddenly not having full Y axis movement

Results 1 to 2 of 2
  1. 09-01-2020, 06:35 PM #1
    eeyore124
    eeyore124 is offline Member
    Join Date
    Jul 2020
    Posts
    2

    new 60w Chinese laser suddenly not having full Y axis movement

    The laser has been working great. I have added a CloudRay laser combiner. I was aligning the mirrors and
    noticed that I can not get the Y axis to go to the front of the machine. Everything works fine except that it
    will not go past the Y half way point. I connected with Lightburn and had same result.

    Any suggestions ?

    Joe
    Reply With Quote Reply With Quote
  2. 09-02-2020, 12:42 AM #2
    eeyore124
    eeyore124 is offline Member
    Join Date
    Jul 2020
    Posts
    2

    Re: new 60w Chinese laser suddenly not having full Y axis movement

    Figured it out. I had been testing new rotary attachment. I still had the rotary attachment enabled in lightburn. Once I disabled "Enable Rotary" in Lightburn everything worked fine
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules