Hello,
Our shop just purchased a 2009 PM1330 CNC lathe with the Siemens Sinumerik 802c controller. This machine was in storage for the last 5 years and fired up just fine. Problem, the controller will not accept any of the factory passwords needed to set-up the machine. The previous shop did not change any of the passwords we are told. Can anyone clue us in on what might be going on here? Thanks!
Results 1 to 3 of 3
-
08-27-2020, 07:23 PM #1
Registered
- Join Date
- Feb 2011
- Posts
- 38
Siemens 802c password help needed!
-
08-27-2020, 09:14 PM #2
Banned
- Join Date
- Aug 2009
- Posts
- 1570
Re: Siemens 802c password help needed!
... try SIEMENS someone said in this Thread
https://support.industry.siemens.com...=0&pageSize=10
good luck,
DJ
-
08-27-2020, 09:20 PM #3
Registered
- Join Date
- Feb 2011
- Posts
- 38
Re: Siemens 802c password help needed!
Thank you. We had not found that particular thread yet but it looks promising for sure!
Reply With QuoteSimilar Threads
-
siemens 802d or 802c postprocessor for power mill
By saeed_niknami in forum PowerMILLReplies: 1Last Post: 03-08-2017, 08:49 AM -
siemens 802d or 802c postprocessor for cam work !
By saeed_niknami in forum CamWorksReplies: 1Last Post: 01-26-2014, 01:00 AM -
Siemens (sinumerik 802C base line)
By Afzal in forum Controller & Computer SolutionsReplies: 3Last Post: 01-16-2013, 02:36 PM -
Need Siemens 802C Controller Parts
By LaysMachinist in forum SIEMENS -> GENERALReplies: 6Last Post: 02-22-2011, 04:24 AM -
Siemens 802C
By Htech in forum CNC (Mill / Lathe) Control Software (NC)Replies: 1Last Post: 01-29-2009, 11:57 PM
Tags for this Thread
Posting Permissions
