I recently got my first cnc and use it with ArtCam 2018 and Mach3. I did some simple engraving and cutting pieces in flat materials and everything went smoothly. Now, I decided to try engraving on the rings.
Where can I find a tutorial how to do simple engraving on rings, so I can solve the following problems:
- Every engraving I make in ArtCam in Mach3 is mirrored (fliped horizontally)
- How can I most easily determine zero correctly on the x, y(a) and z axes?
Regards,
Midhat
Results 1 to 2 of 2
-
09-28-2020, 06:18 PM #1
- Join Date
- Aug 2020
- Posts
- 3
Tutorial for simple rotary engraving
-
09-29-2020, 07:32 PM #2
- Join Date
- Jun 2015
- Posts
- 5
Re: Tutorial for simple rotary engraving
Autodesk----> ArtCAM forum + Mach3/4 pdf tutorials.
Reply With QuoteSimilar Threads
-
Laser Engraving Advanced Tutorial
By Nolan Yang in forum VideosReplies: 25Last Post: 11-01-2017, 08:50 AM -
Laser cutter software RDworks v8 tutorial 01 How to Draw Simple Graphics
By AmyThunderlaser in forum Thunder LaserReplies: 1Last Post: 12-30-2015, 08:16 AM -
Rotary Tutorial
By bsimages in forum VectricReplies: 3Last Post: 04-27-2011, 10:16 PM -
Tutorial for simple lasercutting?
By kongen867 in forum SolidworksReplies: 4Last Post: 05-28-2010, 03:56 PM -
Rotary Tutorial for Aspire & V-Carve
By rcnewcomb in forum VectricReplies: 7Last Post: 05-17-2010, 12:06 AM
Tags for this Thread
Posting Permissions
