528,088 active members*
3,620 visitors online*
Register for free
Login
IndustryArena Forum > CAD Software > Logic Trace CNC/DXF > video #2 assembly of the parts for a sail boat, drawing the bottom panels
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Oct 2007
    Posts
    791

    video #2 assembly of the parts for a sail boat, drawing the bottom panels

    from boat builders handbook 1950 a speedy 14 foot international dingy class sailer
    I am going to digitize all the full sized diagrams and cut the parts on a cnc machine
    I also will show the assembly on video #2
    beam 5 feet
    weight 165 lbs
    depth amidships 21 in
    depth at bow 21 in
    depth at transom 16 in
    sail area 125 sq feet
    seating 2 adults cruising 3 adults


    Attached Thumbnails Attached Thumbnails IMG_7594.JPG  

  2. #2
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Posts
    23452

    Re: video #2 assembly of the parts for a sail boat, drawing the bottom panels

    Looks nice!
    What is the class or name?
    I have built a few sail boats, dinghy's, cedar strip canoe and water-ski boat.
    The small dinghy's were plywood panels 'sewn' together with copper wire and covered with fibre glass cloth and fibre glass resin
    Al.
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.

  3. #3
    Registered
    Join Date
    Oct 2007
    Posts
    791

    Re: video #2 assembly of the parts for a sail boat, drawing the bottom panels

    its a zephyr international dingy class #287 from a 1950 book of boats, wish you were closer to me as you could finish it off

Similar Threads

  1. Replies: 0
    Last Post: 07-28-2020, 05:01 PM
  2. Arrow 500 need drawing for drawbar assembly
    By scudzuki in forum Cincinnati CNC
    Replies: 4
    Last Post: 08-22-2016, 08:51 PM
  3. spindle assembly/parts drawing for a SV-50?
    By tc429 in forum Mori Seiki Mills
    Replies: 3
    Last Post: 02-09-2011, 07:09 PM
  4. CNC Boat Hull Plug video
    By direwolf in forum Parts for Radio Control Models
    Replies: 4
    Last Post: 02-29-2008, 08:01 AM
  5. Routing boat parts in plywood - tab / bridge / punch out
    By Sam A in forum General WoodWorking
    Replies: 7
    Last Post: 11-19-2007, 01:08 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •