530,042 active members*
3,637 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Mori Seiki Machines > Mori Seiki lathes > Mori Seiki SL-1 Lathe Screen Not Turning On
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Jun 2017
    Posts
    10

    Mori Seiki SL-1 Lathe Screen Not Turning On

    Dear all,

    When I turn on with the green button, the machine turns on half of it (some pcb turn on and some doesnt)
    The Spindle drive does not turns ON. The screen doesnt turns ON.
    I have meassured the 24VDC input in the screen and it is OK (voltaje is present).

    I would like some orientation on where or what to search in the screen pcb.
    It is a CRT fanuc model A61L-0001-0072.
    I am not sure if there must be another input voltage comming from the signal cable.

    I would also apreciate if you can give me an schematic (Electrical) of the screen or the complete machine.

    This is a machine with FANUC SYSTEM 6T


    Thank you for your help.

  2. #2
    Registered
    Join Date
    Dec 2006
    Posts
    11

    Re: Mori Seiki SL-1 Lathe Screen Not Turning On

    Martin, Have you been able to repair the problem yet? I had a similar problem a few years ago, and I am going to look for my records on it. Al I remember so far is that there was a board behind the keyboard which has a DC - DC regulator, I believe that it had 24VDC input and 5VDC output, and it was defective.
    Holland Industrial Control Service
    don@holland-industrial.com

Similar Threads

  1. Replies: 0
    Last Post: 11-16-2017, 12:12 AM
  2. Mori Seiki TL-1 CNC Lathe turning center 1982
    By LexLuthier in forum Ebay Ads here
    Replies: 1
    Last Post: 06-20-2017, 09:02 PM
  3. Turning question: I.D. ACME thread in Mori Seiki CNC lathe
    By AMCjeepCJ in forum General MetalWork Discussion
    Replies: 5
    Last Post: 03-06-2016, 06:35 PM
  4. Replies: 17
    Last Post: 06-30-2011, 04:36 PM
  5. Replies: 0
    Last Post: 07-29-2009, 11:23 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •