584,805 active members*
5,350 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2020
    Posts
    19

    Installing T-Track

    Folks ...

    Getting ready to install T-Track in my Wasteboard. Simple question:

    Do y’all set the track even with the wasteboard height ? Or maybe lower to allow for resurfacing ?

    Thank you for your help.

    Bobby

  2. #2
    Join Date
    Apr 2004
    Posts
    5728

    Re: Installing T-Track

    Yes.
    Andrew Werby
    Website

  3. #3
    Join Date
    Jan 2007
    Posts
    626

    Re: Installing T-Track

    I'd set them lower to allow ressurfacing.
    I'm going to secure the T tracks to my Aluminium table and then mount spoil board 'strips' inbetween each track. That should make them easier to replay when needed.

Similar Threads

  1. Need EZ Track SX help
    By talvare in forum Bridgeport / Hardinge Mills
    Replies: 9
    Last Post: 05-13-2022, 07:37 PM
  2. Track
    By HorridHenry in forum DIY CNC Router Table Machines
    Replies: 1
    Last Post: 03-21-2012, 03:45 AM
  3. Am I on the right track
    By ctmandu in forum Vacuum forming, Thermoforming etc
    Replies: 18
    Last Post: 10-11-2011, 05:05 PM
  4. EZ Track DX?
    By Machinereaper1 in forum Bridgeport / Hardinge Mills
    Replies: 16
    Last Post: 09-21-2008, 07:35 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •