584,805 active members*
5,200 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Stepper Motors / Drives > anaheim nema 23 with driver 23md 106s to bob board
Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2004
    Posts
    85

    anaheim nema 23 with driver 23md 106s to bob board

    how do I hook these up to the Chinese made mach3 breakout board?

    the pins from the driver are:

    DIR
    CLOCK
    ON/OFF
    MS2
    MS1
    12-24VDC
    0VDC

    the last two I get and I think ms2 and ms1 control the number of steps (full,half etc) but don't know how to use them either.

    Thanks,
    Greg

  2. #2
    Join Date
    Jan 2004
    Posts
    85

    Re: anaheim nema 23 with driver 23md 106s to bob board

    I only need the dir, clock and the 12vdc and 0vdc. as soon as I try to hook up the clock pin the motor starts moving erratic. If I to the clock pin to ground the motor does the same thing.Click image for larger version. 

Name:	stepper.jpg 
Views:	0 
Size:	82.8 KB 
ID:	448756

Similar Threads

  1. Anaheim 23MD106S stepper connection to C25 breakout board...
    By Reinier in forum Stepper Motors / Drives
    Replies: 1
    Last Post: 02-14-2018, 09:52 PM
  2. Nema 17 Stepper motor on Nema 23 driver
    By Thomas T in forum Laser Engraving / Cutting Machine General Topics
    Replies: 6
    Last Post: 10-21-2014, 08:59 AM
  3. The better driver for nema 23
    By MASNSN in forum Controller Cards
    Replies: 0
    Last Post: 05-24-2012, 10:22 AM
  4. Looking for guidence! anaheim auto driver
    By techsol in forum CNC Machine Related Electronics
    Replies: 0
    Last Post: 10-02-2005, 02:11 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •