584,860 active members*
5,359 visitors online*
Register for free
Login
Results 1 to 6 of 6
  1. #1

    Huanyang VFD setup

    Hi all,

    I have done some reading, and think these are the important parameters to set. Before I get started, can someone please check if these settings are correct, or if there is anything missing?

    VFD: Huanyang HY03D011B (110V, 3.0KW)
    Spindle: Huanyang GDZ-65-800C (800W, 110V, 400Hz, 24000RPM)

    For now I want to set this up to use the potentiometer for speed control. Later this will be connected to a Buildbotics controller by RS485.

    PD000 = 0
    PD001 = 0
    PD002 = 0
    PD005 = 400
    PD004 = 400
    PD003 = 400
    PD072 = 400
    PD008 = 110
    PD011 = 120
    PD141 = 110
    PD142 = 7
    PD073 = 120
    PD000 = 1

    Then later, when connected to the controller, change these settings:
    PD000 = 0
    PD001 = 2
    PD002 = 2
    PD163 = 1
    PD164 = 1
    PD165 = 3
    PD000 = 1


    Thank you!

  2. #2

    Re: Huanyang VFD setup

    Bump!

  3. #3
    Join Date
    Jan 2005
    Posts
    15362

    Re: Huanyang VFD setup

    Quote Originally Posted by garrett1812 View Post
    Hi all,

    I have done some reading, and think these are the important parameters to set. Before I get started, can someone please check if these settings are correct, or if there is anything missing?

    VFD: Huanyang HY03D011B (110V, 3.0KW)
    Spindle: Huanyang GDZ-65-800C (800W, 110V, 400Hz, 24000RPM)

    For now I want to set this up to use the potentiometer for speed control. Later this will be connected to a Buildbotics controller by RS485.

    PD000 = 0
    PD001 = 0
    PD002 = 0
    PD005 = 400
    PD004 = 400
    PD003 = 400
    PD072 = 400
    PD008 = 110
    PD011 = 120
    PD141 = 110
    PD142 = 7
    PD073 = 120
    PD000 = 1

    Then later, when connected to the controller, change these settings:
    PD000 = 0
    PD001 = 2
    PD002 = 2
    PD163 = 1
    PD164 = 1
    PD165 = 3
    PD000 = 1


    Thank you!
    It looks ok to get started there are more Parameters that will need to be set though, why 3Kw for a 800w spindle it may fault out if you don't have enough input amps you need double the input amps as to what the spindle Amps will be
    Mactec54

  4. #4

    Re: Huanyang VFD setup

    What other parameters should I set?

    Smaller VFDs were not available for purchase when I bought it, so I had to go with a 3kW.

  5. #5
    Join Date
    Jan 2005
    Posts
    15362

    Re: Huanyang VFD setup

    Quote Originally Posted by garrett1812 View Post
    What other parameters should I set?

    Smaller VFDs were not available for purchase when I bought it, so I had to go with a 3kW.
    Is this a water cooled spindle
    Mactec54

  6. #6
    Quote Originally Posted by mactec54 View Post
    Is this a water cooled spindle
    Yes.

Similar Threads

  1. Replies: 10
    Last Post: 11-14-2023, 07:17 PM
  2. More setup problems with Huanyang Inverter
    By old_bill in forum Spindles / VFD
    Replies: 3
    Last Post: 06-27-2015, 09:28 PM
  3. Huanyang Inverter 2.2KW setup - SMOKE PLEASE HELP
    By Mokra in forum Phase Converters
    Replies: 2
    Last Post: 10-11-2014, 01:34 AM
  4. HuanYang VFD 2200 Watt Beginner Setup
    By arizonavideo in forum Phase Converters
    Replies: 2
    Last Post: 01-09-2012, 02:00 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •