585,759 active members*
3,821 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Deckel, Maho, Aciera, Abene Mills > Maho DMC70V - TSC/IKZ (Through spindle coolant) problem

Thread: Maho DMC70V - TSC/IKZ (Through spindle coolant) problem

Results 1 to 2 of 2
  1. 10-26-2020, 10:47 PM #1
    maciek95k
    maciek95k is offline Registered
    Join Date
    Mar 2018
    Posts
    3

    Maho DMC70V - TSC/IKZ (Through spindle coolant) problem

    Hi,

    I have a spindle from Maho DMC70V milling machine. As I found, some of this machines have through spindle cooling system (TSC). I bought spindle with oryginal hydraulic tool clamp. The hydraulic clamp have additional inner but it looks like connector for air blow through spindle in ATC cycle. I need any information about TSC system in this machines. It is possible to add this system to my spindle? I attach the photos of spindle and hydraulic clamp. Maybe someone have service manual for this machine? Thank you in advance.



    Reply With Quote Reply With Quote
  2. 12-08-2020, 10:14 AM #2
    SutherlandMachining
    SutherlandMachining is offline Member
    Join Date
    Dec 2019
    Posts
    9

    Re: Maho DMC70V - TSC/IKZ (Through spindle coolant) problem

    do you still have access to this machine ? I am looking for a set of parameters macro's and anything I can get my hands on for the same machine any help would be very helpful
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. New Problem- Emcoturn 465SM - sub spindle coolant plugged? I think?
    By John_B in forum EMCO Lathe
    Replies: 0
    Last Post: 05-19-2019, 12:45 AM
  2. Maho MH500C Spindle problem
    By georgetsag in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 1
    Last Post: 07-01-2016, 04:13 PM
  3. Motor spindle DMC70V
    By Potti in forum SERVICE FOR CNC-MACHINES
    Replies: 0
    Last Post: 05-06-2011, 08:22 AM
  4. Serious and urgent disassembling problem on esv4020 okuma thru spindle coolant system
    By ungie in forum Okuma
    Replies: 3
    Last Post: 02-08-2011, 09:07 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules