Hey guys,
Thank you for being such a valuable resource. I have a 20w fiber laser from Wuhan Leadjet Technologies, the laser came with a built in control unit screen & operating system. Unfortunately, the system only lets you place very basic text. I wanted to know if there was anyway I could either put a new program on this device, or if there is a file type I can save to a usb that I can use another program to load onto there (ezcad maybe)?
Thus far, every time I tried to use a usb stick to load a file on the device, it does not load.
Thanks!
Results 1 to 2 of 2
-
09-11-2020, 03:22 PM #1
Member
- Join Date
- Sep 2020
- Posts
- 1
Newbie Galvo 20w Fiber Laser question (need diff software)
-
09-23-2020, 03:42 AM #2
Member
- Join Date
- Aug 2020
- Posts
- 20
Re: Newbie Galvo 20w Fiber Laser question (need diff software)
Hello, if you have any question about ezcad, you can log on to the website to leave a message or call us directly, and there are more laser controllers on the website for you to choose.
Reply With Quote
Posting Permissions
