I have a machine that had dead RT and WS board batteries. I've replaced the batteries but do not think I have the bios configured quite right. I was hoping someone could provide me the configs for my specific boards.
WS Board 3-424-2123A03
Bios (2A41BU41)
RT Board 3-424-2168A02
Bios (2A4L6D4C)
Results 1 to 5 of 5
-
09-14-2020, 08:50 PM #1
Member
- Join Date
- Aug 2020
- Posts
- 23
Cincinnati Arrow 1000 Bios Config
-
09-15-2020, 12:56 AM #2
Banned
- Join Date
- Aug 2009
- Posts
- 1570
Re: Cincinnati Arrow 1000 Bios Config
hope someone can help you with the exact settings but, in the mean while waiting...your photo 2 and 3 are cutoff and cant see the Options.
-
09-15-2020, 01:02 AM #3
Member
- Join Date
- Aug 2020
- Posts
- 23
Re: Cincinnati Arrow 1000 Bios Config
Thanks. I only had those photos of the Bios numbers. I will have to go grab photos of the current settings but that shouldn't be a problem.
Originally Posted by machinehop5
-
09-16-2020, 01:36 PM #4
Member
- Join Date
- Mar 2008
- Posts
- 285
Re: Cincinnati Arrow 1000 Bios Config
Contact Cincinnati Tech-Support at Fives-MSI. 1-800-934-0735. We can get you the BIOS for the WS-CPU. Normally we load the BIOS onto the RT-CPU using a Binary Program and a Floppy Disk drive on a bench setup.
-
10-28-2023, 02:28 PM #5
Member
- Join Date
- Oct 2023
- Posts
- 1
Re: Cincinnati Arrow 1000 Bios Config
I have the same problem on my RT 2A4L6D45 card I NEED HELP
Reply With QuoteSimilar Threads
-
Cincinnati Milacron Arrow 750 BIOS help needed!!
By hayasi in forum Cincinnati CNCReplies: 13Last Post: 10-26-2018, 05:22 PM -
cincinnati milacron 1000 acramatic 2100 NEED HELP WITH BIOS TO START PLEASE
By gotair510 in forum Cincinnati CNCReplies: 4Last Post: 04-16-2017, 10:25 AM -
Cincinnati Arrow 500 System Config
By ToolMan58 in forum Cincinnati CNCReplies: 2Last Post: 11-27-2014, 08:03 PM -
Setting up a Cincinnati Arrow 1000
By dreygata in forum Cincinnati CNCReplies: 6Last Post: 04-09-2012, 08:09 PM
Tags for this Thread
Posting Permissions
