584,812 active members*
5,337 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1

    HELP BZT 750P

    HELLO,
    I am new excuse me I made with a translator because I speak only French..
    My problem is that I can not reference my machine the numbers run in eding cnc and never stop.
    My machine is well installed there are recognized drivers and the software is not in demo mode I am on the correct port in the configuration for usn
    Thank you for your help
    Francois

  2. #2
    Join Date
    Nov 2008
    Posts
    42

    Re: HELP BZT 750P

    Quote Originally Posted by Francois20 View Post
    HELLO,
    I am new excuse me I made with a translator because I speak only French..
    My problem is that I can not reference my machine the numbers run in eding cnc and never stop.
    My machine is well installed there are recognized drivers and the software is not in demo mode I am on the correct port in the configuration for usn
    Thank you for your help
    Francois
    Hello,
    are your reference switches installed right?
    Do you get response on the I/O Page in EdingCNC while you are jogging your machine to your reference point?

    Is your machine moving during the referencing or do you just see the Coordinates Are changing?

    Kind regards
    Geko

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •