Hello,

I have Leadwell MCH-350 with Fanuc OMF. While cycling I got suddenly this error "998 rom parity : rom no 0E2".
I started the cnc while pressing delete + reset.
Machine started normally. When I put parameter 905 bit 5 (backup) on and reboot cnc I got again this error message.
Also tried another mem.board, motherboard and power supply.

I have read my eprom chips e1 and e2. Have those file in bin-format. I have also paper copy of ladder. Is it possible to open that bin-file and view it in graphic form? I'm pretty sure that the problem is bad rom no 0E2.

//timppat