585,712 active members*
3,934 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Denford Triac fanuc O-M Datum problem

Thread: Denford Triac fanuc O-M Datum problem

Results 1 to 3 of 3
  1. 09-17-2020, 12:05 PM #1
    malutki669
    malutki669 is offline Registered
    Join Date
    Aug 2013
    Posts
    4

    Denford Triac fanuc O-M Datum problem

    Hello
    I bought a Denford Triac milling machine on Fanuc O-M and after a short time I noticed that the axes could not be homed. Manual axes movement works ok, no alarms are displayed when I try to homing the axes. I made a backup of the parameters parameters. In the attachment I added copies of parameters and diagnostics, maybe someone will notice a problem why I can't datum the axes . Best regards
    Reply With Quote Reply With Quote
  2. 09-17-2020, 12:49 PM #2
    drdos
    drdos is offline Member
    Join Date
    Apr 2011
    Posts
    841

    Re: Denford Triac fanuc O-M Datum problem

    Try powering down the control then press and hold the P and CAN buttons while it powers up. Make sure that you jog the axis away from the home position on all the axis before trying to home.
    Reply With Quote Reply With Quote
  3. 09-17-2020, 12:56 PM #3
    malutki669
    malutki669 is offline Registered
    Join Date
    Aug 2013
    Posts
    4

    Re: Denford Triac fanuc O-M Datum problem

    hi
    Unfortunately I tried it already.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Denford Triac Fanuc OM ATC Fault
    By jamesgates1000 in forum Benchtop Machines
    Replies: 1
    Last Post: 12-13-2017, 03:23 PM
  2. DENFORD TRIAC VMC
    By haasmanuk in forum Benchtop Machines
    Replies: 2
    Last Post: 10-06-2014, 03:43 PM
  3. backup for denford triac three axis milling machine with fanuc 21i control
    By waqas in forum Fanuc
    Replies: 0
    Last Post: 04-21-2011, 07:57 PM
  4. Denford triac help
    By Jimthefish in forum Stepper Motors / Drives
    Replies: 1
    Last Post: 03-30-2010, 11:11 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules