So I have purchased a 1994 Fadal 4020 and I'm pretty sure it's in good condition. I have ran a few parts through her and had great results. I have too many questions so I'll start slow. I found a checklist to go through to check out the machine and have been going in order through it. First problem I ran into was a lack of chiller action. I chased it too far just to realize the outlet was only showing phantom power and the unit works properly when plugged into a different power source. So I traced the chiller outlet back to the fuse (f1) and it seems all fine. How should I approach making this outlet work properly? Does it turn on with spindle or when you power up the machine? Thanks! James