Hello all

I finally have my new spindle and VFD all wired up but I am unclear as to how to set the setting for the VFD

My current set up is

Water cooled GDZ-100-4.5 spindle 220V 400Hz 24000rpm

My VFD is a YL620-G-5.5Kw 220V with input specified as AC 220V 50/60 HZ
Claims output as 25A 17KVA

Before buying this setup I was told the VFD comes preprogramed but I am skeptical that this is true so I was hoping to get some feed back. Most of the information I can find on settings all pertain to much smaller spindles. Does anyone else have this setup or know the proper setting to change?