I have just finished my conversion on a Optimum MH-28V fitted with
Nemo 34 stepper motors, 20mm linear rails with Hiwin Linear bearings, 20mm ball screws, coolant tank and enclosure shown in the photos attached.
Attachment 449174Attachment 449176Attachment 449176Attachment 449178Attachment 449178Attachment 449180Attachment 449182
Results 1 to 2 of 2
Threaded View
-
09-22-2020, 12:37 PM #1
Registered
- Join Date
- Nov 2012
- Posts
- 1
Optimum MH-28V CNC Conversion with 20mm linear rails
Reply With QuoteSimilar Threads
-
Standard linear motion conversion to linear rails.
By bobmagnuson in forum Avid CNCReplies: 11Last Post: 03-25-2022, 09:52 PM -
G0704 CNC Conversion - Linear Rails, Servos, Ballscrews
By tjschweizer in forum Benchtop MachinesReplies: 79Last Post: 12-19-2015, 02:19 PM -
DIY making my own linear rails from 20mm steel what should i use as a protective coat
By austinblake92 in forum CNC Wood Router Project LogReplies: 5Last Post: 09-16-2013, 02:03 AM -
Small chinese lathe ways, or linear rails for cnc conversion, accuracy difference?
By Apples in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 12-11-2011, 04:44 AM -
16mm vs. 20mm supported linear rails...
By WilliamD in forum DIY CNC Router Table MachinesReplies: 4Last Post: 12-20-2008, 12:37 AM
Tags for this Thread
Posting Permissions
