[currinh]

CNC-Joe tried to contact me with a PM. I tried to respond but received the following message. Do you have receipt of PMs turned off?

CNC-Joe has chosen not to receive private messages or may not be allowed to receive private messages. Therefore you may not send your message to him/her.

Thanks.
Hugh

[guitarchitect]

Hugh I would absolutely love to have a copy of the drawings - this is a terrific conversion, i love that it keeps things compact!
Definitely committed to doing the conversion, so i can promise good feedback on the drawings. My lathe is the Canadian-sold version of the PM, a Craftex lathe. [email protected] is my email address, I've sent you a PM as well!

[currinh]

guitarchitect:

Glad to, but that email looks strange. "[email protected]" doesn't seem valid. Can you send me an email address in a PM.

Thanks.

Hugh I would absolutely love to have a copy of the drawings - this is a terrific conversion, i love that it keeps things compact!
Definitely committed to doing the conversion, so i can promise good feedback on the drawings. My lathe is the Canadian-sold version of the PM, a Craftex lathe. [email protected] is my email address, I've sent you a PM as well!

[guitarchitect]

guitarchitect:

Glad to, but that email looks strange. "[email protected]" doesn't seem valid. Can you send me an email address in a PM.

Thanks.

By username @ gmail I meant my forum username - PM sent and I can't wait to get started!

[smokey41]

Great write up. Thanks for sharing your journey.