[Hassanhac]

I need help
I have got cnc machining center with fanuc m15 control
I have lost all parameters
I won't fanuc m15 parameter manual
I wont to readjust the parametrs
Now only x axes appear on the screen
I wont to adjust the numbers of axis controller
The machine have 5 axis
Can you help me to get the parametrs please?

[drdos]

You are going to have to give us a lot more information than that. Those parameters are defined by Fanuc but set by the builder. You will never get this machine running by simply guessing what value to put into which parameters. Whose the builder, which model, 15MA or 15MB, it all matters

[Hassanhac]

You are going to have to give us a lot more information than that. Those parameters are defined by Fanuc but set by the builder. You will never get this machine running by simply guessing what value to put into which parameters. Whose the builder, which model, 15MA or 15MB, it all matters

Hi
I made a mistake and i lost machine parameter
I repack it again manually but machine not working
I will send you all information
Please call me
00905418167717
[email protected]

[Hassanhac]

You are going to have to give us a lot more information than that. Those parameters are defined by Fanuc but set by the builder. You will never get this machine running by simply guessing what value to put into which parameters. Whose the builder, which model, 15MA or 15MB, it all matters

Hi
I made a mistake and i lost machine parameter
I repack it again manually but machine not working
I will send you all information
Please call me
00905418167717
[email protected]

[Hassanhac]

You are going to have to give us a lot more information than that. Those parameters are defined by Fanuc but set by the builder. You will never get this machine running by simply guessing what value to put into which parameters. Whose the builder, which model, 15MA or 15MB, it all matters

I think my problem is her