585,954 active members*
4,650 visitors online*
Register for free
Login
IndustryArena Forum > Manufacturing Processes > Turning > Chuck not moving but the open and close light work.

Thread: Chuck not moving but the open and close light work.

Results 1 to 2 of 2
  1. 09-29-2020, 07:06 AM #1
    PRAS
    PRAS is offline Member
    Join Date
    Sep 2020
    Posts
    1

    Chuck not moving but the open and close light work.

    Hi, I have mori seiki cl 203, a problem with door switch where I have to one and off the machine few time.
    Now the Chuck is not moving. I don't know where the error comes from. The light shows that the chuck is close, and when I open with the pedal, the light comes off.
    Is it any parameters problems, please?
    Reply With Quote Reply With Quote
  2. 09-29-2020, 02:51 PM #2
    the_gentlegiant
    the_gentlegiant is offline Member
    Join Date
    May 2016
    Posts
    471

    Re: Chuck not moving but the open and close light work.

    It's probably that faulty door switch. The chuck won't turn if it thinks the door is open. Best check the wiring on the door switch and make sure it is all good.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules