Hi everyone, I am currently doing a project that requires a 2 axes motor stage able to place a device on a large plane (for instance 1m*1m). I am trying to find the easier way to do this, and I have found that cnc machines are really close to this, except for the laser/drilling etc.. device that is built in. Do you think I could easily get rid of this and use just the motor stage, and put my own device instead ? is it possible to "hack" the motor control so that it fits my pupose ? If you have any thoughts or any suggestions on how to realise this, I would be reallly happy to read you.
Thread: Need help for a project
Results 1 to 3 of 3
-
09-30-2020, 01:18 PM #1
Member
- Join Date
- Sep 2020
- Posts
- 2
Need help for a project
-
09-30-2020, 06:13 PM #2
Community Moderator
- Join Date
- Dec 2013
- Posts
- 5717
Re: Need help for a project
Yes, and Yes. Then it's just a matter of the accuracy that you require.
Jim Dawson
Sandy, Oregon, USA
-
10-02-2020, 03:06 PM #3
Member
- Join Date
- Sep 2020
- Posts
- 2
Re: Need help for a project
Ok, thanks for the answer. I guess you mean that i won't be able to reach better accuracy then the one of the cnc machine.
Similar Threads
-
cnc project
By katran in forum Uncategorised MetalWorking MachinesReplies: 7Last Post: 11-25-2009, 09:15 AM -
15-5PH Project 70
By cdlenterprises in forum MetalWork DiscussionReplies: 2Last Post: 12-30-2008, 08:04 PM -
DIY Project with MDF
By studysession in forum DIY CNC Router Table MachinesReplies: 0Last Post: 01-08-2007, 08:57 PM -
First project
By Xterrian in forum CodingReplies: 2Last Post: 10-01-2005, 07:24 AM -
Look what I can do! (First CNC Project)
By cp8071 in forum DIY CNC Router Table MachinesReplies: 7Last Post: 09-06-2005, 10:26 PM
Tags for this Thread
Posting Permissions
