584,861 active members*
4,827 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Gecko Drives > What do you recommend for aMmaxnc 4 axis conversion to Gecko drives
Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2005
    Posts
    12

    What do you recommend for aMmaxnc 4 axis conversion to Gecko drives

    I have an old Maxnc 15CL that I've had for a long time. It's starting to get twitchy so I' considering changing over to everything Gecko. What is recommended as far as board, drives, etc. Remember I'll want to convert the 4th axis as well.

  2. #2
    Join Date
    Aug 2005
    Posts
    1091

    Re: What do you recommend for aMmaxnc 4 axis conversion to Gecko drives

    I’d suggest the G540 4-axis controller. It should be fine for that size machine.

    https://www.homanndesigns.com/index....products_id=80

    Cheers

    Peter


    Sent from my iPhone using Tapatalk Pro
    -------------------------------------------------
    Homann Designs - http://www.homanndesigns.com/store

Similar Threads

  1. Replies: 0
    Last Post: 08-21-2016, 07:55 PM
  2. Replies: 5
    Last Post: 06-26-2011, 05:28 PM
  3. Replies: 3
    Last Post: 12-13-2010, 02:45 PM
  4. Gecko 202 drives
    By Pete Stenabaugh in forum Gecko Drives
    Replies: 16
    Last Post: 07-30-2006, 01:39 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •