I have a lathe fitted with an old Flashcut generator and driver. The steppers are model MP-2301-D-30. They connect to the Flashcut driver with 6 pin molex mini fit jr. connectors, but motors are 4 wire steppers. I now have a CNC router with a Gecko G540. I was thinking it would be nice to be able to run the lathe with Mach3 instead of the old, outdated version of Flashcut I am limited to with my other driver. I can solder well enough to make an adapter, but I don't have any components to make my own cables. I'd have to order all the components, then still assemble it myself. So I was wondering if there might be an adapter I could buy to adapt the 6-pin molex mini fit jr. to DB9. Or maybe someone who make cables than anyone can recommend. I could probably remove the pins in the molex on the motors and move them to the correct pin numbers if I have to, but I cant find anything with molex mini fit jr. to DB9. Anybody have a suggestion?