I just picked up a Dyna Myte 1007 milling machine. From the quick look over i did, it doesn't seem to have (or ever had) a built in display or controller. However inside the electrical enclosure it seems to have some sort of control chip with a serial port cable coming out (there is actually 2 chips with a serial port but from reading I'm guessing one is built in).
The machine doesn't have a tool changer, but for my home shop it'll be perfect, especially with the enclosure.
I'm on the hunt for manuals and any information possible. I'll get a pic of the chip i believe is the controller that was added. I'm wondering if I can use Mach 3 or something similar.
I've attached a picture.
Thanks
Jeremy