Hello everybody,
Can anybody tell me what the following error message on a Phillips B2T means:
‘’3.9 no ignition feed back for Z axis’’
It’s a VDF 180 with a B2T. Software version 3024/218
Thank you
Hello everybody,
Can anybody tell me what the following error message on a Phillips B2T means:
‘’3.9 no ignition feed back for Z axis’’
It’s a VDF 180 with a B2T. Software version 3024/218
Thank you
Hello
We also have a Boehringer VDF 180 and had the same problem
The source of the error is the contactors on the Z position that need to be cleaned.
Regards
Dieter
Guys, I can not send private message to you, can you help me with vdf 180c boehringer, I am getting err 2 7, main drive current limit