Dear Experts
Warning 130858 Cross Check Alarm because Y0004 is 00000000 from PMC1 but DCS signals

it's Y004 00010111,
Also in CNC screen under MCC test, "execute MCC test Machine GRP1 blinking in red
1.We have checked emergency switch of machine, found alright
2. All connections on Makino IO PCB checked and found ok
3. Replaced Fanuc Io modules on Makino IO PCB
4. Replaced Makino IO PCB V1. 05 with V1. 07
Still continue getting same warning, which is getting reset but again appearing
Request your feedback on this
Regards