584,826 active members*
5,203 visitors online*
Register for free
Login
IndustryArena Forum > CNC Plasma, EDM / Waterjet Machines > DynaTorch > Is Dynatorch still being supported?
Results 1 to 3 of 3
  1. #1
    Join Date
    Oct 2020
    Posts
    1

    Is Dynatorch still being supported?

    Hi, we have just bought the assets of an Australian company that used the Dynatorch Super B plasma table. The software is operational but very old (version 3.2.0.212 from 2006) and we want to upgrade to the latest version.

    I have been to the Dynatorch website which tells me that CNC Shop and Service in Alabama now sells and supports DT equipment. However, I can get no reply to my emails to CNCS&S, the office phone number is disconnected and while I can leave a message on Russell's cellphone, no reply.

    Have they gone out of business?

    If so, does anyone else provide support for DT equipment?

    thanks

    Andrew

  2. #2
    Join Date
    May 2015
    Posts
    684

    Re: Is Dynatorch still being supported?

    Andrew,
    I'm in Brisbane and while I don't do anything with Dynatorch, I can help with a retrofit kit if you would care to send me a PM. A machine of that vintage would benefit greatly from a modern controller.
    Rod
    Rod Webster
    www.vehiclemods.net.au

  3. #3
    Join Date
    Sep 2009
    Posts
    27

    Re: Is Dynatorch still being supported?

    I just contacted russell at (cncshopandparts.com) there in business and very helpful, you may had been cought in the transition from Dyna to cnc shop.
    He has reto kits for the B

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •