584,866 active members*
4,771 visitors online*
Register for free
Login

Thread: dc spindle

Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2009
    Posts
    46

    dc spindle

    Guys i need some advice again. I have on my hands a controller for a small dc spindle . it is a mdp first 1q 60/10 that controls a 90watt motor.
    My first question is if i could control it through g540 and a mach and also if it can handle a bigger spindle like this ?

    Thanks in advance guys.

  2. #2
    Join Date
    Jul 2018
    Posts
    6254

    Re: dc spindle

    Hi Happy - The data sheet says 600W max so the 500W spindles you linked to are cool if the data sheet is correct. Happy routing. And yes to all the other questions just read the Gecko manual... Peter

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •