Hello gentlemen,

Quick question to the group, I was about to install a new servo amplifier since the old one was faulty, but I wanted to make sure there was no problem witht the motor, so I checked the resistance with the ohmmeter, of all three motors in order to compare since I didn´t hava a nominal value to be used as reference. The motors from axis X and Y read 2.6 ohms in all cable combinations. but the motor from axis Z read 0.08 ohms. To me that reading is close to a short. but I am not a 100% sure, since I don´t know the nominal value.

Does anyone know what should be the reading for this motor that would like to share please? please see attached picture for motor details. Thank you!