Hello.
I would like to use Gantry Square.
I need a guide to configuration. Please all steps.
My machine has 2 motors for Y. Two limit switches are mounted and connected.
Thank you in advance.
Daniel
Results 1 to 9 of 9
Threaded View
-
10-11-2020, 04:37 PM #1
- Join Date
- Nov 2015
- Posts
- 260
Gantry Square two motors für y axis.
Reply With QuoteSimilar Threads
-
3-Axis Steel Gantry with THK Linear Slides and Parker Servo Motors
By pparrett in forum For Sale OnlyReplies: 0Last Post: 09-24-2019, 06:14 AM -
Troubleshooting Slave Axis and Gantry square
By Jakeller449 in forum DIY CNC Router Table MachinesReplies: 6Last Post: 06-06-2019, 01:31 PM -
Making a slaved X Axis gantry perfectly square
By TheBulk in forum DIY CNC Router Table MachinesReplies: 0Last Post: 09-08-2011, 05:58 AM -
flying gantry: 4 motors/3 axis setup
By nicanor76 in forum Uncategorised WoodWorking MachinesReplies: 4Last Post: 04-13-2011, 07:24 PM -
Gantry/two motors per axis...how to configure
By chozo in forum DIY CNC Router Table MachinesReplies: 8Last Post: 08-28-2004, 02:50 AM
Tags for this Thread
Posting Permissions
