Help needed. Trying to drip feed program from compact flash card. I can load program from card to machine so i know I can access card. Unfortunately machine doesn't have enough memory. I have been pulling my hair out and reading various forums all relating to using m198 followed by p1234. Most forums mention
%
O0001;
M198 P1234;
M30;
%
How do I get the percentage sign before program number on machine? Do I need it?
Is there a simple way on the 21i that I'm missing?
What parameters do I need to change.
Thanks in advance Robbie
Results 1 to 2 of 2
-
10-21-2020, 07:33 PM #1
Registered
- Join Date
- Dec 2013
- Posts
- 0
Fanuc 21i-m memory card drip feeding
-
10-22-2020, 05:02 AM #2
Banned
- Join Date
- Aug 2009
- Posts
- 1573
Re: Fanuc 21i-m memory card drip feeding
...more information link that might help ya
Section 6.8
https://www.cnc1.com/hubfs/fanuc-lib...put_Output.pdf
Reply With QuoteSimilar Threads
-
FANUC 31i-b - DPRNT IN MEMORY CARD USING A SUB PROGRAM FROM THE MEMORY CARD
By puto_rafa in forum FanucReplies: 2Last Post: 08-22-2023, 07:52 PM -
Fanuc i series drip feed from Memory card
By jimmyjolly in forum FanucReplies: 5Last Post: 11-04-2018, 12:39 AM -
Drip Feeding to a Fanuc 6m
By TR MFG in forum FanucReplies: 16Last Post: 09-01-2017, 06:51 PM -
Drip feeding DNC to Fanuc 6M
By Camfather in forum FanucReplies: 13Last Post: 04-21-2017, 03:50 PM -
Drip-feeding a Fanuc 21M
By Ed_R in forum FanucReplies: 2Last Post: 09-28-2010, 09:02 PM
Tags for this Thread
Posting Permissions
