Hi All,

Very new to the forum (hi all)

I have an automated cell going in and am measuring parts on a CMM. the parts are being produced on 2 Nakamura NTRX-300's (which uses the i31 controller with Fanuc Focas) and supplied to the CMM via robotic arm.

I am looking to send simple offset values back from the CMM to the controller...

the CMM program will measure lets say 15 dimensions and can output a (or multiple) file(s) in ANY required format or file type. the files can contain any data that I program (this is the easy bit), the bit I am struggling with is a program / application / small exe file that will be able to send the data back into the controller.

does anybody have a simple application like this, or can suggest where to look, able to write me something

I believe I will need to purchase the Fanuc Focas libraries (?) so that the .DLL is installed on the PC?

any help / pointers greatly appreciated