I've just picked up a Hardinge with an Accuslide on it with Fagor controls. Plan to to an upgrade possibly with Centroid Acorn at the heart. Going through the hardware I can't find the specs for the motors anywhere. I looked through the cabinet and can't find an AC to DC transformer either so don't even know if the motors are AC servos or DC servos. Can anyone help?

Motors are MCG 2243-MTE2911-1

They appear to be what was used on the GT-27 and MCG appears to be out of business. At least their phone number is disconnected.

Does anyone know if they are DC or AC and what the max voltage is?



While I'm asking questions, the encoders are Renco 77822-033 and I found this thread (https://www.cnczone.com/forums/servo...ml#post1206926) where post #25 goes into some detail but if I wanted to hook this up to say a gecko with 5 inputs for the encoder could I even use these or just grab some new ones?


Attachment 450338