does anyone use or have experience with Fryer? We are in the process of buying a machine, we were inbetween HAAS and Milltronics, but Fryer has taken some of our interest. It is hard to find anyone who has run them? We would just like to know if the company has good support, control, etc.
Thanks
www.fryermachine.com
model of interst is the VB-60
Thread: Fryer Vmc
Results 1 to 3 of 3
-
07-26-2007, 03:57 PM #1
Registered
- Join Date
- Jul 2007
- Posts
- 50
Fryer Vmc
-
08-05-2007, 02:22 PM #2
Registered
- Join Date
- Jan 2006
- Posts
- 10
The company i work for won't buy another Fryer. Mostly support issue's. Allen
-
08-05-2007, 05:07 PM #3
Member
- Join Date
- Oct 2005
- Posts
- 4230
great machine until it looses control and drives the tool thru the table , part , fixture etc ,
apparantly the computer can t process the information fast enough and the machine loses it, which was a regular thing
tool changer constantly screwed up on us as well ,
at the time the price on was 59G , in my opinion that lemon was a bad joke
if i was buying a machine i would avoid fryer
Reply With QuoteSimilar Threads
-
Anybody Else With Fryer Problems
By jlv3901 in forum Uncategorised MetalWorking MachinesReplies: 7Last Post: 01-18-2013, 11:53 AM
Posting Permissions
